1. How To Specify Vci Odis In C
2. How To Specify Vci Odis In Excel

It supports J2534 protocol, and it will support other protocol for free later. In addition, the FVCI J2534 VCI supports multiply communication manner of DOIP protocol, and it can set up Ethernet(tx+, tx-, rx+, rx-) and active line to any pin number of OBD2 except for ground pins and power pin. Fcar FVCI Passthru specification. The ‘VCI Manager Information’ pop up will appear, select ‘OK’ to continue. Note: Do not disconnect the DoIP VCI from the JLR Approved Diagnostic Equipment during the update process. Note: The DoIP VCI update process will take approximately 12 minutes to complete. The DoIP VCI will now automatically restart. CarDAQ-Plus 3 OE Diagnostics and Programming VCI for SAE J2534-1 and J2534-2 device with even more advanced support including: CAN FD, 4 CAN Channels, v05.00 API and DoIP. Aug 14, 2017 Set computer to fixed IP address 192.168.0.1. Connect USB to VCI POD. In web browser, connect to 172.22.22.22. Under Network Settings, change radio button from “Obtain an IP address automatically from a DHCP server” to “Use the following IP address and settings”.

How to Set VAS 6154 ODIS VW 4.1.3 WIFI Connection

WIFI VAS 6154 ODIS VW 4.1.3 VAG Diagnose Interface Replace VAS 5054A

How to Set VAS 6154 WIFI:

Step 1.input the fourth CD and open it and then install the vas 6154 drive

Step 2 .Open the CD and then chose the vas 6154 drive and install the vas 6154 drive

Step 3.After installed and click the Desktop - symbol

Step 4.Click the Device Configuration

Step 5.Choose the connection way “WLAN”

Step 6.Choose the “save”

How To Specify Vci Odis In C

Step 7.Plug the vas 6154 to the car

How To Specify Vci Odis In Excel

Step 8.Open the WIFI and find the VAS-6154 wifi name and connect it.

Step 9.It shows Connected

Step10.The state of connect successfully

Step 11.Open odis software

Step 12.Connect successfully,and can use normally